新增api后current.txt更新问题()

在新增api后,进行系统编译前,需要先在系统中使用make命令,对current.txt进行自动更新。

(1) android 低版本,新增api直接编译,会出现入下异常:

******************************

You have tried to change the API from what has been previously approved.

To make these errors go away, you have two choices:

1) You can add “@hide” javadoc comments to the methods, etc. listed in the

errors above.

2) You can update current.txt by executing the following command:

make update-api

To submit the revised current.txt to the main Android repository,

you will need approval.

******************************

需要配置编译环境后,执行 make update-ap 系统自动更新current文档,再进行编译。

(2) anndroid 高版本,新增api直接编译,会出现如下异常:

******************************You have tried to change the API from what has been previously approved.

To make these errors go away, you have two choices: 1. You can add ‘@hide’ javadoc comments to the methods, etc. listed in the errors above.

2. You can update current.txt by executing the following command: make api-stubs-docs-update-current-api

To submit the revised current.txt to the main Android repository, you will need approval.******************************

需要配置编译环境后,执行 make api-stubs-docs-update-current-api 系统自动更新current文档,再进行编译。

最后,保存或上传current.txt文件更新即可。————————————————版权声明:本文为CSDN博主「xuann」的原创文章,遵循CC 4.0 BY-SA版权协议,转载请附上原文出处链接及本声明。原文链接:https://blog.csdn.net/xuann/article/details/119949127

————————

在新增api后,进行系统编译前,需要先在系统中使用make命令,对current.txt进行自动更新。

(1) android 低版本,新增api直接编译,会出现入下异常:

******************************

You have tried to change the API from what has been previously approved.

To make these errors go away, you have two choices:

1) You can add “@hide” javadoc comments to the methods, etc. listed in the

errors above.

2) You can update current.txt by executing the following command:

make update-api

To submit the revised current.txt to the main Android repository,

you will need approval.

******************************

需要配置编译环境后,执行 make update-ap 系统自动更新current文档,再进行编译。

(2) anndroid 高版本,新增api直接编译,会出现如下异常:

******************************You have tried to change the API from what has been previously approved.

To make these errors go away, you have two choices: 1. You can add ‘@hide’ javadoc comments to the methods, etc. listed in the errors above.

2. You can update current.txt by executing the following command: make api-stubs-docs-update-current-api

To submit the revised current.txt to the main Android repository, you will need approval.******************************

需要配置编译环境后,执行 make api-stubs-docs-update-current-api 系统自动更新current文档,再进行编译。

最后,保存或上传current.txt文件更新即可。————————————————版权声明:本文为CSDN博主「xuann」的原创文章,遵循CC 4.0 BY-SA版权协议,转载请附上原文出处链接及本声明。原文链接:https://blog.csdn.net/xuann/article/details/119949127